Load paper and print media

Load paper and print media


Load tray 1
1.
Open tray 1.

HP Color Laserjet CP2020 owl loadmpt 01 Load paper and print media

2.
If loading long sheets of media, pull out the extension tray.

HP Color Laserjet CP2020 owl loadmpt 02 Load paper and print media

3.
If necessary, flip out the extension.

HP Color Laserjet CP2020 owl loadmpt 03 Load paper and print media

4.
Extend the paper guides fully (callout 1) and then load the media stack into tray 1 (callout 2). Adjust the paper guides to the size of the paper.

HP Color Laserjet CP2020 owl loadmpt 04 Load paper and print media

HP Color Laserjet CP2020 note Load paper and print media NOTE:

Place the media into tray 1 with the side to be printed on face-up and the top toward the product.

Load tray 2 or 3
1.
Pull the tray out of the product.

HP Color Laserjet CP2020 load tray 01 Load paper and print media

2.
Slide open the paper length and width guides.

HP Color Laserjet CP2020 tw st16 ug Load paper and print media

‚óŹ
To load Legal-size paper, extend the tray by pressing and holding the extension tab while pulling the front of the tray toward you.

HP Color Laserjet CP2020 tw st15 ug Load paper and print media

HP Color Laserjet CP2020 note Load paper and print media NOTE:

When it is loaded with Legal-size paper, the tray extends from the front of the product approximately 64 mm (2.5 inches).

3.
Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.

HP Color Laserjet CP2020 tw st14 ug Load paper and print media

4.
Push down on the paper to make sure that the paper stack is below the paper limit tabs on the side of the tray.

HP Color Laserjet CP2020 tw st06 Load paper and print media

5.
Slide the tray into the product.

HP Color Laserjet CP2020 load tray 02 Load paper and print media

HP Color Laserjet CP2020 Load paper and print media