Network config. menu
Use this menu to establish network configuration settings.
|
|
|
|
|
|
|
| Select Automatic to automatically configure all the TCP/IP settings.
|
| Select Manual to manually configure the IP address, subnet mask, and default gateway.
|
| The default setting is Automatic.
|
|
|
|
|
| This item is used when you are connecting the product directly to a personal computer using an Ethernet cable (you might have to set this to On or Off depending on the computer being used).
|
| The default setting is On.
|
|
|
|
|
| This item is used by the network administrator to limit the network services available on this product.
|
| The default setting for all items is On.
|
|
|
|
|
| No: The product IP address will not appear on the control-panel display.
|
| Yes: The product IP address will appear on the control-panel display, alternating between supplies information and the IP address of the device. The IP address will not be displayed if an error condition exits.
|
| The default setting is No.
|
|
|
|
|
| Sets the link speed manually if needed.
|
| After setting the link speed, the product automatically restarts.
|
|
|
|
|
| Press OK to restore the network configuration settings to the default values.
|
|
HP Color Laserjet CP2020 Network config. menu