| 1.
|
| On the control-panel menu, press OK.
|
|
| 2.
|
Use the Left arrow ( ) or the Right arrow ( ) button to select Network config., and then press OK.
|
|
| 3.
|
| Use the Left arrow () or the Right arrow () button to select TCP/IP config, and then press OK.
|
|
| 4.
|
| Use the Left arrow () or the Right arrow () button to select Manual, and then press OK.
|
|
| 5.
|
| Press the Right arrow () button to increase the value for the first section of the IP address. Press the Left arrow () button to decrease the value. When the value is correct, press OK. Repeat this process for the other three sections of the IP address.
|
|
| 6.
|
| If the address is correct, use the Left arrow () or the Right arrow () button to select Yes, and then press OK. Repeat step 5 for the subnet mask and default gateway settings.
|
-or-
If the IP address is incorrect, use the Left arrow () or the Right arrow () button to select No, and then press OK. Repeat step 5 to establish the correct IP address, and then repeat step 5 for the subnet mask and default gateway settings.
|